The RI 2441 Solid state switch module is designed for applications such as:
- Production testing of mobile handsets
- Production testing of mobile base stations
- Built-In-Test (BITE) applications
- MIMO applications
Solid State Switch RI 2441
SP4T (Single Pole, 4 Throws), terminated, 0.1-6 GHz
Small, light, and well suited for high-volume testing, such as production testing, where long lifetime, fast switching time, and low power consumption is needed.
The Ranatec SP4T Solid State Switch features a single-pole, four-throw (SP4T) configuration operating from DC to 6 GHz. It offers low insertion loss under 1.9 dB up to 3 GHz and high isolation, making it suitable for production testing, MIMO, and base station applications. With switching times below 100 μs and a supply voltage range of 5 to 45 VDC, it delivers reliable performance in RF environments.
Applications
Features
- Switch mode: SP4T latching, terminated
- DC – 6 GHz RF frequency range
- Insertion loss < 1.9 dB up to 3 GHz
- 63 dBm IP3
- +30 dBm maximum input power
- Flexible supply voltage: 5-45 VDC
- <100 μs switching time
- High repeatability
- Ultra-long lifetime
Specifications
| Switch mode | SP4T latching, terminated |
| Switching time | < 100 μs |
| Supply voltage | 5 – 45 VDC |
| Supply current | < 1 mA |
| Operating frequency | DC – 6 GHz |
| Impedance | 50 Ohm |
| Max DC at RF inputs | 0 VDC |
| VSWR (max) |
1.4:1 @ 0.01 – 0.698 GHz 1.3:1 @ 0.698 – 3 GHz 1.4:1 @ 3 – 6 GHz |
| Insertion loss (max) |
1.6 dB @ 0.01 – 0.698 GHz 1.9 dB @ 0.698 – 3 GHz 2.2 dB @ 3 – 6 GHz |
| Isolation RFC – RFx (min) |
55 dB @ 0.01 – 0.698 GHz 40 dB @ 0.698 – 3 GHz 35 dB @ 3 – 6 GHz |
| Isolation RFx – RFy (min) |
55 dB @ 0.01 – 0.698 GHz 40 dB @ 0.698 – 3 GHz 30 dB @ 3 – 6 GHz |
| Input power thru path (max) | 30 dBm @ 0.01 – 6 GHz |
| Input power hot switching & into termination (max) | 20 dBm @ 0.01 – 6 GHz |
| Input IP3 (typ) | 63 dBm @ 0.01 – 6 GHz |
| Actuating current | < 50 μA (active low, input pulled up to 3 VDC) |
Environmental Specifications
- Operating temp: 0°C to +50°C
- Storage temp: -20°C to +70°C
- Relative humidity: 95% at +40°C
Mechanical Specifications
- Dimensions: 50x50x30 mm
- Weight: 25 g
- Connectors: SMA(F)
Ordering
RI 2441 SP4T Solid State Switch
You might also like
The Ranatec SP8T Solid State Switch is a single-pole, eight-throw (SP8T) module covering DC to 6 GHz. It provides less than 3.1 dB insertion loss up to 3 GHz and…
The Ranatec DP8T Solid State Switch is a dual-pole, eight-throw (DP8T) module for RF applications requiring multiple signal paths. Operating from 0.1 to 4.8 GHz, it offers insertion loss under…
Even though it is switch-oriented, it is well suited for integration of all other coaxial/waveguide parts of a test system. Due to its backplane-based architecture, the user can easily add/remove…
The Ranatec RF2018B is an RF Switch system with 12 solid state switch modules, each with 1 pole and 4 throws. It is well suited for high volume testing, where…
The Ranatec RF2020B RF Switch Box includes three SP4T switches up to 6 GHz and two SPDT switches up to 18 GHz. With low insertion loss and high isolation, it…
The Ranatec 4×4 Butler Matrix (RI 3041) operates from 2.4 to 8 GHz, providing beamforming for phased array antennas and supporting multichannel MIMO testing with up to 4 transmit and…
The Ranatec 8×8 Butler Matrix (RI 3101) is a beamforming network covering 2.4 to 8 GHz, supporting up to 8 transmit and 8 receive ports for phased array antennas. It…
